Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: lintel

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Dear Jim:

I think you are right, but in this particular situation, my understanding of
the triangular load looks like in fig.1 (see attached) and not like in fig.2
Thank you kindly all for helpful comments
Regards,

Vlad
simina(--nospam--at)idirect.com


----- Original Message -----
From: "Jim Persing" <jpersing(--nospam--at)fhoarch.com>
To: <seaint(--nospam--at)seaint.org>
Sent: Tuesday, January 28, 2003 11:28
Subject: RE: lintel


> Vlad,
>
> Assumption of a triangular load IS arch action.
>
> Jim
>
> > -----Original Message-----
> > From: vlad [mailto:simina(--nospam--at)idirect.com]
> > Sent: Monday, January 27, 2003 9:08 PM
> > To: seaint(--nospam--at)seaint.org
> > Subject: Re: lintel
> >
> >
> > Good point, but I don't think there is an arch action here.
> > And the wall above the opening is high enough to justify a
> > triangular shaped
> > load.
> > Thank you for the input.
> >
> > Vlad
> > simina(--nospam--at)idirect.com
> >
> > ----- Original Message -----
> > From: "Jim Persing" <jpersing(--nospam--at)fhoarch.com>
> > To: <seaint(--nospam--at)seaint.org>
> > Sent: Monday, January 27, 2003 12:49
> > Subject: RE: lintel
> >
> >
> > > A suggestion was made regarding using arch action for the
> > lintel design.
> > > That is fine but be sure there is enough wall on each side
> > to support the
> > > horizontal reaction from the arch.  There are also some deflection
> > > compatibility requirements in the UBC for supporting
> > masonry.  See Section
> > > 2106.2.9
> > >
> > > Jim Persing
> > >
> > > > -----Original Message-----
> > > > From: vlad [mailto:simina(--nospam--at)idirect.com]
> > > > Sent: Sunday, January 26, 2003 1:15 PM
> > > > To: seaint(--nospam--at)seaint.org
> > > > Subject: Re: lintel
> > > >
> > > >
> > > > The opening is 8'-0" wide and the wall is 12" thick.
> > > > Mt. Richardson suggested 2 angles on each side connected with
> > > > steel tabs,
> > > > and so I did.
> > > > I provided 2-L4"x4"x1/4" (for a moment of 8.9 kNm) connected
> > > > with tabs @24".
> > > > Thank you for taking the time to answer.
> > > >
> > > > Regards,
> > > > Vlad
> > > > simina(--nospam--at)idirect.com
> > > >
> > > > Now I think I should put the tabs @32"! (every other block)
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Stanley E Scholl" <sscholl2(--nospam--at)juno.com>
> > > > To: <seaint(--nospam--at)seaint.org>
> > > > Sent: Saturday, January 25, 2003 22:03
> > > > Subject: Re: lintel
> > > >
> > > >
> > > > > How wide is the door? If a 3'-0" man door, and if the
> > > > horiz. reinf. is
> > > > > say at the 8 ft. level and perhaps 2- #4, you may not
> > need a lintel.
> > > > >
> > > > > Stan Scholl, P.E.
> > > > > Laguna Beach, CA
> > > > >
> > > > > ******* ****** ******* ******** ******* ******* ******* ***
> > > > > *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> > > > > *
> > > > > *   This email was sent to you via Structural Engineers
> > > > > *   Association of Southern California (SEAOSC) server. To
> > > > > *   subscribe (no fee) or UnSubscribe, please go to:
> > > > > *
> > > > > *   http://www.seaint.org/sealist1.asp
> > > > > *
> > > > > *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> > > > > *   send to the list is public domain and may be re-posted
> > > > > *   without your permission. Make sure you visit our web
> > > > > *   site at: http://www.seaint.org
> > > > > ******* ****** ****** ****** ******* ****** ****** ********
> > > > >
> > > >
> > > >
> > > > ******* ****** ******* ******** ******* ******* ******* ***
> > > > *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> > > > *
> > > > *   This email was sent to you via Structural Engineers
> > > > *   Association of Southern California (SEAOSC) server. To
> > > > *   subscribe (no fee) or UnSubscribe, please go to:
> > > > *
> > > > *   http://www.seaint.org/sealist1.asp
> > > > *
> > > > *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> > > > *   send to the list is public domain and may be re-posted
> > > > *   without your permission. Make sure you visit our web
> > > > *   site at: http://www.seaint.org
> > > > ******* ****** ****** ****** ******* ****** ****** ********
> > >
> > >
> > > ******* ****** ******* ******** ******* ******* ******* ***
> > > *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> > > *
> > > *   This email was sent to you via Structural Engineers
> > > *   Association of Southern California (SEAOSC) server. To
> > > *   subscribe (no fee) or UnSubscribe, please go to:
> > > *
> > > *   http://www.seaint.org/sealist1.asp
> > > *
> > > *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> > > *   send to the list is public domain and may be re-posted
> > > *   without your permission. Make sure you visit our web
> > > *   site at: http://www.seaint.org
> > > ******* ****** ****** ****** ******* ****** ****** ********
> > >
> >
> >
> > ******* ****** ******* ******** ******* ******* ******* ***
> > *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> > *
> > *   This email was sent to you via Structural Engineers
> > *   Association of Southern California (SEAOSC) server. To
> > *   subscribe (no fee) or UnSubscribe, please go to:
> > *
> > *   http://www.seaint.org/sealist1.asp
> > *
> > *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> > *   send to the list is public domain and may be re-posted
> > *   without your permission. Make sure you visit our web
> > *   site at: http://www.seaint.org
> > ******* ****** ****** ****** ******* ****** ****** ********
>
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> *   This email was sent to you via Structural Engineers
> *   Association of Southern California (SEAOSC) server. To
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> *   send to the list is public domain and may be re-posted
> *   without your permission. Make sure you visit our web
> *   site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>

Attachment: door_open.dwf
Description: model/vnd.dwf