Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: metal "Z" Channel

[Subject Prev][Subject Next][Thread Prev][Thread Next]
When I have looked I could not find any that were made as a stock size.  If
you come across some let me know.

George Richards,  PE

-----Original Message-----
From: Kenny Yip [mailto:kenny(--nospam--at)jeiwa.com]
Sent: Monday, March 17, 2003 9:56 AM
To: seaint(--nospam--at)seaint.org
Subject: metal "Z" Channel


Could anybody tell me where I can find some information on 16 gage 8" Z
channels?  Thank you!

Kenny Yip, P.E.
Jones Engineers
Bellingham, WA



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********