Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

steel lintel for brick

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I performed an structural evaluation for an upscale residence today, and
stumbled upon a strange situation.

House is wood framed with brick cladding. To support the brick over the
garage door, about 20ft or so, is a steel lintel of some type, I am guessing
an angle but I guess it could be a T section. The bottom bearing mortar
joint has seperated from the brick almost enough to jamb a pen into the gap.
This is the most in the middle, but exists to the end. There are no cracks
or other signs of distress in the brick. Any guesses as to what is causing

I am going to suggest the gap be filled with mortar/grout or a steel shim.
Any other better ideas??

I can email anyone a couple of pics privately if you so desire..


Andrew Kester, EI
Longwood, FL

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at:
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*   Questions to seaint-ad(--nospam--at) Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: 
******* ****** ****** ****** ******* ****** ****** ********