Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: CCD Method Of Anchorage Design

[Subject Prev][Subject Next][Thread Prev][Thread Next]
The meanings of low, intermediate, and high seismic risk in ACI 318-02 are
defined in Table R1.1.8.3. 

William C. Sherman, PE
CDM, Denver, CO
Phone: 303-298-1311
Fax: 303-293-8236
email: shermanwc(--nospam--at)cdm.com


Rick.Drake wrote: 

> 1st Question:  Should regions of moderate or high seismic risk be
> considered equivalent to Seismic Design Categories C, D, E, and F, as
> defined by the 2000 IBC and later codes?
 

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********