Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: French drain installation

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I am a little confused.  Are you installing a French drain or just providing
a continuous perimeter wall drain?

There is no standard of care, but I can offer what I have done in the past
for a continuous perimeter wall drain.  
I provide filter fabric in the base of the excavation and use 3/8" open
graded clean crushed rock at the base lay the pipe at (1/4" ideal 1/8" after
the war) per foot.  I use enough filter fabric to wrap all of the crushed
rock.  After the pipe is placed I back fill with more crushed rock to
provide a minimum of 12" of rock around the pipe.  I then finish wrapping
the crushed rock in filter fabric and lap the fabric over the crushed rock.
This wraps the entire crushed rock in filer fabric.  If you just wrap the
pipe, the filter fabric has much less surface area and will seal with fines
rather quickly.  

If you are indeed considering a French drain, you should run your perimeter
wall drain to the French drain.  The size of the French drain and location
will depend on the water table and the percolation rate of the soil.  I
would avoid making the perimeter wall drain the French drain. You will wind
up with a pool of water along your wall.

If indeed you have a retaining wall, just run your continuous wall drain to
weeps placed at about 10' centers.  

Harold O. Sprague

-----Original Message-----
From: djkiss55(--nospam--at) [mailto:djkiss55(--nospam--at)] 
Sent: Monday, July 07, 2003 1:13 PM
To: seaint(--nospam--at)
Subject: French drain installation

Any response to these issues is gratly appreciated.

What is the standard of care for installing a 4" dia. french drain along a
70 foot-long by 9 foot high masonry retaining wall? Are there any gravel or
crushed rock specific requirements? What is the minimum slope required by
the standard of care? Is a 1/4" slope appropriate?

Thank you in advance.

Desi J. Kiss, MS, PE
Phone: 949/458-9169
E-mail: djkiss55(--nospam--at)

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at:
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*   Questions to seaint-ad(--nospam--at) Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: 
******* ****** ****** ****** ******* ****** ****** ********