Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Philippines CFS Member

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I would guess that's a "lipped" channel, with a depth of 200mm, a flange
width of 75mm, a lip of 25mm and a thickness of 3.5mm (or about 10 gauge).

-----Original Message-----
From: Paul Blomberg [mailto:blomberg_az(--nospam--at)]
Sent: Monday, July 21, 2003 12:37 PM
To: SEA Int.
Subject: Philippines CFS Member

I'm trying to get a rough capacity of a roof purlin
used in a Philippines industrial facility circa 1998.
While I'm waiting for additional detailed information
from the owner, does anyone have information on a cold
formed steel member designation LC-200x75x25x3.5?

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at:
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*   Questions to seaint-ad(--nospam--at) Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: 
******* ****** ****** ****** ******* ****** ****** ********