Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: 2x2 Plate Washers for WSP Shear Walls (UBC)

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Thanks, Nels.

FYI, the OD for a 5/8" diameter anchor is 2.75" which will still
(probably) require a 3" diameter hole saw.

Regards,

T. William (Bill) Allen, S.E. (CA #2607)
V/F (949) 248-8588
San Juan Capistrano, CA


:-----Original Message-----
:From: Nels Roselund, SE [mailto:njineer(--nospam--at)att.net] 
:Sent: Tuesday, August 26, 2003 11:33 AM
:To: seaint(--nospam--at)seaint.org
:Subject: Re: 2x2 Plate Washers for WSP Shear Walls (UBC)
:
:
:Bill,
:
:The cast washers that I learned from my mentors years ago to 
:call malleable iron washers are 2-1/2" O.D. for 1/2" bolts.  
:That's close enough, and I would not hesitate to use them in 
:your application.
:
:They are available from McMaster-Carr phone 562-962-5911 
:[catalog number 91153A033].
:
:Nels Roselund
:Structural Engineer
:South San Gabriel, CA
:njineer(--nospam--at)att.net



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********