Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Thickened Floor Slabs 2

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Unger:

 

According to a general view point, a partition load of 500 lb per linear foot or less does not require a wall footing. But, this is just a “rule of thumb” or an empirical value. You can also use thickening of the slabs to support an 8-in wall and there are “classical” details available for that.

 

Having said that, it is also prudent to run a check of stresses to be sure of what is going on there. I would refer you to pages 46-47 of the reference: Designing Floor Slabs on Grade by B.C. Ringo & R.B. Anderson (Aberdeen Group publication) wherein the problem per se is discussed. They are referring to Army-TM Equations for the purpose.

 

Best regards,

 

Syed Faiz Ahmad: MEngg, M.ASCE

Senior Structural Engineer

Saudi Oger Ltd

Riyadh, Saudi Arabia.

 

-----Original Message-----
From: Lester Unger [mailto:lesterunger(--nospam--at)yahoo.com]
Sent: Tuesday, October 07, 2003 9:09 PM
To: seaint(--nospam--at)seaint.org
Subject: Thickened Floor Slabs 2

 

Thank you for the responses. It seems unanimous and logical to use a thickened slab. How many are using the same logic for 8" non bearing cmu walls? Using thickened slabs for 8" walls instead of wall footers would be very cost effective.


Do you Yahoo!?
The New Yahoo! Shopping - with improved product search