Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Column located on 4" existing concrete slab

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Pl. check you loading again.  If using the UBC the LL on exterior balconies is 60psf
 
Trib. area on column = 14'/2 x 4'/2 = 14 SF
 
LL = 60 psf x 14 SF = 840 LB
 
Generally the slab poured outside are not properly compacted and reinforced.  I would caution against placing on the slab.  Base plate is a good idea.  Imagine kids (older ones) jumping up/down at the balcony!
 
A cheaper alternative might be to use foundation blocks available at Home Depot.  Cut slab, dig hole, place foundation block, attach post to block - SIMPLE!
 
-  Aswin
_________________________________
Aswin Rangaswamy, P.E.
Structural Engineer
Jacobs Facilities Inc. (www.jacobs.com )
(714) 503-3772 (P); (714) 503-3865 (F)
----- Original Message -----
Sent: Wednesday, October 29, 2003 4:37 PM
Subject: Column located on 4" existing concrete slab


I have a balcony size 14'x4' supported by two column.  I estimate about 700# D+L loads will transfer to 4x4 post.
 
Can I place this column on top existing concrete about 4" thick?  If not, what is the correct procedure.
 
TIA


Do you Yahoo!?
Exclusive Video Premiere - Britney Spears