Need a book? Engineering books recommendations...
RE: Unbraced Length[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: "'seaint(--nospam--at)seaint.org'" <seaint(--nospam--at)seaint.org>
- Subject: RE: Unbraced Length
- From: "Effland, Greg" <geeffland(--nospam--at)butlermfg.com>
- Date: Wed, 10 Dec 2003 10:45:44 -0600
Title: Unbraced Length
Greg Effland, P.E.
KC, MO USA
From: Udall, Jeffrey D [mailto:JDUdall(--nospam--at)babcock.com]
Sent: Wednesday, December 10, 2003 10:36 AM
Subject: Unbraced Length
I'm presently doing a literature search as part of a university thesis project. I'm hoping this list can give me some assistance.
I'm trying to determine the critical bending moment of a beam when it is subjected to a uniform load. The beam is continuously supported laterally and torsionally on the tension (bottom) flange. The top flange (compression) is not restrained. Current practice is to consider the unbraced length of the compression flange as the full span of the member. In order to reduce this span, stiffeners are added at appropriate intervals that essentially tie the compression flange back to the laterally braced tension flange.
However, these stiffeners are costly in terms of labour, especially when there are large numbers of them and the spans are significant. I am trying to determine the effective span of the compression flange given that it really is attached to the tension flange through the web. The stiffener connects the two flanges together by treating the stiffener as a column, and is therefore quite stiff. The web serves the same purpose but acts only in bending in the weak axis. This is not nearly as effective, but it does provide some degree of strength that is being ignored. I am hypothesizing that the effective unbraced length of the compression flange is less than the full span length, and determination of such will reduce 1. the need for stiffeners, and/or 2. the size of the beam.
I'm reviewing some of the texts by Nethercott, Bleich, Galambos, and a few others, but I can't seem to find my specific situation. Galambos (in his Stability book 5th ed.) makes mention of it but does not elaborate.
Has anyone looked at this arragement before? I'm looking for references if you've got them.
Cambridge, Ontario (Canada)
- Prev by Subject: Unbraced Length
- Next by Subject: RE: Unbraced Length
- Previous by thread: Re: Unbraced Length
- Next by thread: RE: Unbraced Length