Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Brick Shelf Angles

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Section 2103.11.6 of the 2000 IBC requires hot-dip galvanizing of metal
accessories at exterior masonry walls, and "mill galvanized" for interior
walls. 

William C. Sherman, PE 
(Bill Sherman) 
CDM, Denver, CO
Phone: 303-298-1311
Fax: 303-293-8236
email: shermanwc(--nospam--at)cdm.com


> -----Original Message-----
> From: Kestner, James W. [mailto:jkestner(--nospam--at)somervilleinc.com] 
> Sent: Thursday, April 08, 2004 2:25 PM
> To: SEAINT
> Subject: Brick Shelf Angles
> 
> 
> What is the industry standard for the surface finish on steel 
> shelf angles supporting brick? Prime paint on carbon steel, 
> galvanizing, stainless steel, other? Should the choice depend 
> on the height and importance of the building?
> 
> 
> > Jim K.

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********