Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Tales of Terror #1: Architects doing engineering

[Subject Prev][Subject Next][Thread Prev][Thread Next]
IMHO the dumb architect has it right  & you persist in doing  it wrong :o)
Every test I'm aware of shows the distribution to be 1/3, 1/3, 1/3. (If it doesn't change the wall construction, I sometimes use 1/3, 1/2, 1/3 just to keep plan checkers like you at bay.)

At a SEOC convention in S.F. a few years back, researchers from Texas IIRC presented their test results from a simple unblocked pitched roof building. The uniform load at the top plate distributed itself 1/3, 1/2, 1/3. Likewise for every reasonably proportioned floor platform.

Chuck Utzman, P.E.

Dennis Wish wrote:

I started to write this in order to vent my frustration as a contract (sub-contract) plan checker who has found that more architects are designing the structural elements of high-end custom homes. This is upsetting – I’m actually making money as the more errors I find, the more time I spend and the more I make hourly. I don’t need to design their homes, I only need to plan check them.

Don’t misunderstand, I know a great many architects who became engineers and they went through the hard work to prove they were capable. But what I am seeing are architects who think they remember their statics and strength of materials from forty years ago and attempt to apply it today in order to save the cost of hiring an engineer. Three or four plan check cycles later, they tend to find engineers to help them through the things they don’t understand.

Just one example – I can’t resist this one. The designer (I am hesitant to use the title architect) calculates the base shear of a fairly rectangular building with three lines of resistance. Rather than waste the time to design the distribution of the two diaphragms between the three grid lines as simply supported beams, the architect applies 1/3 of the total lateral load to each line of shear. Have I missed something? I’ve been used to figuring the reactions which almost always ends up with 50% of the shear in the middle wall and 25% at each end. He would have been better off eliminating the center shearwall had it not been for a re-entrant corner and don’t get me started on that one.

What has this world come to when BORPELS (California) has no control over architects practicing engineering and the office of the Department of Consumer Affairs that licenses Architects will do nothing until the damage occurs and the Architect is considered potentially negligent (I’ve checked – trust me).

Politics has reached every segment of our society – I mention certification of Framers and find the BIA (Building Industry Association) putting me on their black list.

So, what’s your take on all of this? Should I just retire to Southeastern Arizona and become a hermit (with my wife family and dogs)?


      Dennis S. Wish, PE

California Professional Engineer

Structural Engineering Consultant

dennis.wish(--nospam--at) <mailto:dennis.wish(--nospam--at)> <>

Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (
Version: 6.0.572 / Virus Database: 362 - Release Date: 1/27/2004

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at:
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*   Questions to seaint-ad(--nospam--at) Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at:
******* ****** ****** ****** ******* ****** ****** ********