Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Questions about Slab/Column Connection and Detailing (incorrect subject in my previous email)

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Sorry to send this email again.

List members:

I am designing a condominium in seismic zone area. We are using only the
ShearWalls as Seismic/Wind resisting system and not the columns.

Questions are:

1)Should the Slab/Column connection be designed and detailed as a Pinned
connection without considering the moment transferred from slab?

2)The pinned connection will minimize the punching shear stress. But how to
detail the column/slab connection as pinned condition? some technical paper
mentions that closely spaced ties can be placed over a length equal to one
and one-half times the larger cross-sectional dimension of the column (#3 @
3 in.), Is this a common practice? Are there any other ways?

3)Are the columns to be designed/detailed per ACI 2002 Chapter 21,for
instance rebar splice at midheight of the column?

Your response is greatly appreciated.

Hui Li
Projection Engineer

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********