Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

PT bm to Shearwall

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I have a 7 story parking garage with a shearwall along the ramp. The ramp has a 60 degree bend about mid way up. My shearwall is along this ramp at the interior.

I was planning on making the connection from the PT beams with a corbel (perpendicular to wall) and along the slab parallel to the shearwall with corbels due my fear of restraint cracks in the slab. For a long thick wall like this, I have been told this is the best way to avoid restraint cracks. I am going to require a welded angle from the slab to the wall (about 4' o.c.) at the last stages of the project to transfer the lateral shear, in hopes that most of the shrinkage will be gone by then.

Anyway, along the first part of this ramp before it bends, there is hardly any opposing moment from the opposite side of the wall to counteract the moment from the ramp beams resting on the corbel.

1) I thought about not using the corbels in this area and putting columns in the wall with a movement joint on either side of the column, but then my shearwall is broken up into a couple of smaller segments instead of one 53' long piece. I really need this strip of shear wall for it's lateral component in one direction.

2) I considered placing the beams on the wall itself to get the eccentricity to a minimum. This way my wall stays intact and the moment is manageable. However, I am worried about restraint from the beam pocket not allowing the beam to shrink.

Any suggestions please?


Discover the best of the best at MSN Luxury Living.

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at:
* * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to:
* Questions to seaint-ad(--nospam--at) Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: ******* ****** ****** ****** ******* ****** ****** ********