Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: AASHTO No. 57 - "nominal maximum aggregate size"

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Nominal Size – 1 inch to No.4 Sieve; % Passing – 100 / 1 inch, 90 to 100 / 3/4 inch; 20 to 55 / 1/2 inch; 0 to 15 / 3/8 inch; No.4 / 0 to 5

 

D. Matthew Stuart, P.E., S.E.

Structural Department

SCHOOR DEPALMA

200 State Highway Nine

Manalapan, NJ 07726-0900

Phone: (732) 577-9000 (Ext. 1283)

FAX: (732) 431-9428

Cell: (908) 309-8657

mstuart(--nospam--at)schoordepalma.com

Website: www.schoordepalma.com

 

-----Original Message-----
From: Ken Peoples [mailto:kspeoples(--nospam--at)lvta.net]
Sent: Monday, August 02, 2004 12:36 PM
To: Seaint
Subject: AASHTO No. 57 - "nominal maximum aggregate size"

 

I have the gradation for AASHTO No. 57, but am not sure what the "nominal maximum aggregate size" would be.  I'm sure this is an easy one for most of you who have edited Masterspec.

 

 

Kenneth S. Peoples, P. E.
Lehigh Valley Technical Associates, Inc.
1584 Weaversville Road
Northampton, PA 18067-9039
Phone: (610) 262-6345
Fax: (610) 262-8188
e-mail: kpeoples(--nospam--at)lvta.net