Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Ladder on brick

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Can an exterior ladder be supported off a brick veneer if it does not have
bottom support? I have a 4" brick veneer in front of an 8" CMU backup wall,
with an exterior ladder. The wall and veneer have already been installed and
an exterior ladder is to be installed at the exterior. I would prefer to
support the ladder off the CMU wall but that would be more difficult.
However, I am concerned with drilled-in anchors and induced moments in the
brick veneer. 


William C. Sherman, PE 
(Bill Sherman) 
CDM, Denver, CO
Phone: 303-298-1311
Fax: 303-293-8236
email: shermanwc(--nospam--at)cdm.com

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********