Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Response spectrum analysis - Query

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Tejas,

I would first question your "site specific" response spectrum.  Few if any geotechs know how to correctly do one.  What you have is probably a "probabilistic" computer generated response spectra which if you are near a known fault is possibly wildly inaccurate.  This is why the new USGS maps transition from "probabilistic " to "deterministic" values for most of California.

Thomas Hunt, S.E.
ABS Consulting




Tejas Ins <tejas_ins(--nospam--at)yahoo.com>

10/26/2004 01:49 PM

Please respond to
<seaint(--nospam--at)seaint.org>

To
seaint(--nospam--at)seaint.org
cc
Subject
Response spectrum analysis - Query





Hi All,
I am working on a school design project and learnt that the latest amendments (January 2004) require a site specific response spectrum analysis if the structure has any irregularity (except reentrant corner).  So we got a site specific response spectrum.  The response spectrum analysis gives a base shear (after dividing by R) to be much greater than the static base shear per section 1630.2
 
I am finding the Code language a bit confusing and would like your opinion on the CBC / UBC, where it discusses the reduction of elastic response parameters for design.
 
UBC/CBC section 1631.5.4:  "..... with the limitation that in no case shall the elastic response parameters be reduced such that the corresponding design base shear is less than the Elastic Response Base Shear divided by the value of R."
 
My confusion is:
a. When would the above statement apply and supersede items 1, 2, 3 under section 1631.5.4
b. Why would someone scale forces, moments, displacements and then determine the "corresponding design base shear" ... rather than scale elastic response base shear to the base shear determined in accordance with section 1630.2 and then determine corresponding scaled forces, moments, displacements, etc.
c. If (Elastic Response Base Shear / R > static base shear per section 1630.2) ... what to do?  Use the higher Elastic Response Base Shear / R ? OR scale down further to the Sataic base shear value ?
 
Thank you for your comments.
Tejas Ins, P.E.
 


Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.