Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: 16" thick CMU wall

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Back here in the East we can get Ivany block in 16-inch single wythe sizes.
Check it out:


From: Joe Grill [mailto:jgrill(--nospam--at)]
Sent: Mon 11/8/2004 5:42 PM
To: seaint(--nospam--at)
Subject: 16" thick CMU wall

I have been ask (by the architect, owner, contractor and everyone else in town) to change the design of a concrete retaining/basement wall that was 12" thick to a CMU wall.  The 16" thickness will reduce to 12" at 4 ft from the footing and then to 8" at 8 ft from the footing.  At the base the CMU will require a 16" thickness.  I am assuming the construction will be 2 wythes of 8" CMU.  Is there any special detailing required to make the double wythe work?  The wall will be solid grouted and will have quite a bit of vertical steel in both faces.  I also have horizontal bars at 16" o.c. Is there anything else required?


Joe Grill


Joseph R. Grill, P.E. (Structural)

Shephard - Wesnitzer, Inc.

Civil Engineering and Surveying

1146 W. Hwy 89A Suite B

Sedona, AZ  86340

PHONE (928) 282-1061

FAX (928) 282-2058