Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: High Tire Pressure on Concrete slab

[Subject Prev][Subject Next][Thread Prev][Thread Next]
The information is published in the following report:

"Concrete Industrial Ground Floor" B" R.C. Deacon 
Concrete Society Technical Report 34, The Concrete Society/ British
Industrial Truck Association/ Storage Equipment Manufactures
Association, London, England, 1988

I hope the Similar Assocoiations may have published these types of data
in the U.S.

Himat

>>> GSKWY(--nospam--at)aol.com 11/17/2004 7:52:00 AM >>>
In a message dated 11/16/2004 9:30:36 PM Eastern Standard Time, 
hsolanki(--nospam--at)scgov.net writes:
Average contact pressure:

1. 30 kN Counterbalance lift truck                        2.4  N/mm2
2. 20 kN Reach Trucl                                          5.6 
N/mm2
3. 20 kN Pallet Truck                                         11.0 
N/mm2

Please include the dynamic multiplication factor 

a. Braking                  1.3
b.cornering                1.4
c. Acceleration           1.1
d. uneven surface       1.2        
Where are all these numbers coming from?

Gail Kelley

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********