Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Column Base Plates

[Subject Prev][Subject Next][Thread Prev][Thread Next]
According to AISC's Steel Design Guide Series #1 Column Base Plates, preset
base plates are usually 36" or bigger. For really big ones, 4 tons and up,
there is usually an angle frame that is preset before installing the base
plate.

-----Original Message-----
From: Kestner, James W. [mailto:jkestner(--nospam--at)somervilleinc.com]
Sent: Wednesday, February 09, 2005 9:40 AM
To: SEAINT
Subject: Column Base Plates


What size or weight does a base plate have to reach before you should
consider setting the base plate as a separate unit? 

> Jim K.
> 

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 


This e-mail is intended to be delivered only to the named addressee(s) and
may contain information that is confidential and proprietary.  If this
information is received by anyone other than the named addressee(s), the
recipient(s) should immediately notify the sender by e-mail and promptly
delete the transmitted material from your computer and server.  In no event
shall this material be read, used, stored, or retained by anyone other than
the named addressee(s) without the express written consent of the sender or
the named addressee(s).



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********