Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: cmu wall control joints

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Mark D. Baker wrote:

For any cmu experts out there..



I have a 30'x30'x20' tall, 8" cmu building. I am thinking these dimensions
would be acceptable without any control joints in walls and would like some
other opinions.
Most likely okay, but much greater than that and I'd check.

--
Bill Polhemus, P.E.
Polhemus Engineering Company
http://www.polhemus.cc/


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********