Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: beach front construction materials

[Subject Prev][Subject Next][Thread Prev][Thread Next]
>> "My house is 2 blocks from the beach in San Diego" <<

Sharon, I'm jealous!

:-)

Dave K. Adams, S.E.
Lane Engineers, Inc.
Tulare, CA
E-mail:  davea(--nospam--at)laneengineers.com




-----Original Message-----
From: Sharon Robertson [mailto:sharon(--nospam--at)arconengineers.com] 
Sent: Monday, March 14, 2005 2:22 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: beach front construction materials


Mark,
My house is 2 blocks from the beach in San Diego.  We have a lot of
overcast days.  Most of the year cars parked on the street are wet in
the morning. The house was built in 1941 with 2x3 (full dimension)
studs, plaster board walls and stucco finish.  As far I can tell, the
structure is not compromised by the climate.  Termites love the climate,
so one must be diligent about control, but the construction seems to be
tolerant of the environment.  Your site may be at a less temperate
location. Sharon


-----Original Message-----
From: Mark D. Baker [mailto:shake4bake(--nospam--at)earthlink.net]
Sent: Monday, March 14, 2005 1:57 PM
To: seaint
Subject: beach front construction materials


Any comments on type of materials used for beach front residential
construction that are resistant to the climate?



On a current 2 story project our client (a very succesful commercial
contractor) want to eliminate all wood by using cmu walls, metal stud
partitions, barjoist - metal pan - lt.wt. conc. floor, metal truss roof.
As we are getting into project, the entire structure will need a caisson
foundation system supporting structural slab and the materials described
above. We are now looking for alternative superstructure materials which
aren't so darn heavy due to the impact on foundation system.



We are now thinking of a structural steel vertical/lateral system with
infill for walls. The question is, metal studs, engineered lumber, or
just what for infill would be good to achieve owners desire of climate
durability.



If metal studs, every time you cut a stud or drill a screw you are
compromising the electroplating so..



If engineered lumber, just how well would Timberstrand studs stand up to
a beach climate compared to stick lumber..



At this point I'm fishing for ideas, past experiences, etc.



Thanks,



Mark D. Baker

Baker Engineering













******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********