RE: IBC 2003: Section 1603 - Construction Documents[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: <seaint(--nospam--at)seaint.org>
- Subject: RE: IBC 2003: Section 1603 - Construction Documents
- From: "Wesley Werner" <wwerner(--nospam--at)conewago.com>
- Date: Thu, 2 Jun 2005 17:07:31 -0400
- Disposition-notification-to: "Wesley Werner" <wwerner(--nospam--at)conewago.com>
From: Polhemus, Bill [mailto:bill.polhemus(--nospam--at)tyson.com]
Sent: Thursday, June 02, 2005 4:50 PM
Subject: IBC 2003: Section 1603 - Construction Documents
I'm finishing up a building sheet to go out for bid, showing an open-wall PEMB--really, it's a shed, but a really BIG shed.
I opened the IBC to verify what sorts of information needs to be included on such a drawing, and came across the following:
1603.1 General. Construction documents shall show the size, section and relative locations of structural members with floor levels, column centers and offsets fully dimensioned…
It gives an EXCEPTION to "buildings constructed in accordance with … conventional light-frame construction…" (i.e. Section 2308, which pertains to wood framing).
Going to the Definitions on page 13, we find that Construction Documents are essentially the drawings and specs, etc., "necessary for obtaining a building permit."
Now my question is this: Since this is to be a PEMB designed by others, am I also exempt from the requirement to show "size" and "section" of structural members? Because of course that determination will be by the PEMB manufacturer selected by the Contractor.
In the past, I've always included information such as the Wind and Seismic criteria, the live loads, etc., on this type of drawing so that it is designed consistent with what I, as EOR, think proper. But am I in violation of the Code if I don't also include ALL the information described above?
I guess one out would be that my drawing is NOT the "construction document" to which the code refers since the building won't be erected according to my drawing, only designed. The PEMB supplier will handle the design and the construction drawings.
But if I'm not mistaken, my drawing WILL be the one used to obtain the Building Permit.
As I sit here right now, it looks as though some clarification ought to be made here, perhaps adding PEMBs to the category of "Exception" alongside conventional light-frame construction.
This email and any files transmitted with it are confidential and intended solely for the use of the addressee. If you are not the intended addressee, then you have received this email in error and any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. Please notify us immediately of your unintended receipt by reply and then delete this email and your reply. Tyson Foods, Inc. and its subsidiaries and affiliates will not be held liable to any person resulting from the unintended or unauthorized use of any information contained in this email or as a result of any additions or deletions of information originally contained in this email.
- Prev by Subject: IBC 2003: Section 1603 - Construction Documents
- Next by Subject: RE: IBC 2003: Section 1603 - Construction Documents
- Previous by thread: Re: IBC 2003: Section 1603 - Construction Documents
- Next by thread: RE: IBC 2003: Section 1603 - Construction Documents