Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

CMU Stair/Elevator Shaft

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Just curious, is there any reason why a CMU stairway
inside a steel building would have to be or should be
any greater than 8" thick?  Fire rating is not an
issue and the block theoretically leans on the steel
for lateral loads.  The building is only 3 stories
tall.

Jim Wilson, PE
Stroudsburg, PA

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********