Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Bridge/building

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Did I read that right, you're going to put the new buildings ON the bridge?  That seem sto fall into the "if you have to ask the price..." category.  If you get an answer off line, don't forget to share it with us. This falls so close to the OMGWTFBBQ line, I'd love to hear the answer you get. I'm not sure whether to be envious or thankful that I don't have that client ;-)

Ken Peoples wrote:
Yes, 500' span, with 100' width (for buildings).  The approximate dimension from the water surface to the deck will be about 50'.
 
Best regards,
 
 
Ken
 
Kenneth S. Peoples, P. E.
LVTA
Lehigh Valley Technical Associates, Inc.
1584 Weaversville Road
Northampton, PA 18067
 
Phone: 610-262-6345
Fax:610-262-8188
Email: kpeoples(--nospam--at)lvta.net
----- Original Message -----
Sent: Tuesday, July 19, 2005 1:29 PM
Subject: RE: Bridge/building

 " Any "gut feel" superstructure costs for the main span of 500' x 100' wide x 50' high? "
 
 Am I reading this right???  Your bridge has a 500'-0" span length???  It has to be 100'-0" wide???  And it has to be 50'-0" high (or is this the vertical dimension from off the ground)???  Please clarify.
 
Dave Maynard, PE
Gillette, Wyoming

******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********