Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Turning 1" Rod

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Bill-
I have some connection issues at the other end that the flat (square)
stock is better suited for/to.  I'll check McMaster-Carr.  Thanks. 

Candi Anderson, P.E.  


-----Original Message-----
From: Scott, William N. [mailto:William.Scott(--nospam--at)veco.com] 
Sent: Tuesday, August 16, 2005 1:19 PM
To: 'seaint(--nospam--at)seaint.org'
Subject: RE: Turning 1" Rod

Candi,

A 1X1 bar could be turned to a 1" dia. But why would one do it. You can
find
round bars in many specifications, ranging from A36 to tool quality to
drill
stock. Look at McMaster-Carr for a quick start.

Bill

-----Original Message-----
From: Candi Anderson [mailto:canderson(--nospam--at)mercadoeng.com]
Sent: Tuesday, August 16, 2005 8:38 AM
To: seaint(--nospam--at)seaint.org
Subject: Turning 1" Rod


Anyone out there know if I can have a 1" square rod turned down to a
standard thread (UNC) 1" diameter rod?  Or, do I need the original
square rod to be larger?  I need to be able to attach a turnbuckle.
Thanks for any input.

Candi Anderson, P.E.  




******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********