Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Expoxy type grout for anchor bolt

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Rich,

Why so large?  

FWIW, I've had good luck emailing my local Hilti Sales Engineer w/chemical anchor questions. 

M.

> -----Original Message-----
> From: Rich Lewis [mailto:seaint03(--nospam--at)lewisengineering.com] 
> Sent: Tuesday, August 23, 2005 1:55 PM
> To: seaint(--nospam--at)seaint.org
> Subject: Expoxy type grout for anchor bolt
> 
> Is there a product for grouting anchor bolts in large holes?  
>   Typically, from what I've seen, most epoxy anchor holes are 
> slightly bigger than the bolt diameter.  
>  
> I have a project where the anchor bolts were not installed 
> correctly.  The contractor wants to core 2-3" diameter holes 
> for installing new bolts.  I was wondering if there was a 
> product that would bond to the bolts and a hole that big.  
> The anchor diameters are ¾" & 1".
> 
> 

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********