Need a book? Engineering books recommendations...
Re: Corrosion in reinforcing steel in slabs[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: <seaint(--nospam--at)seaint.org>, <seaint(--nospam--at)seaint.org>
- Subject: Re: Corrosion in reinforcing steel in slabs
- From: Neil Moore <nmoore(--nospam--at)innercite.com>
- Date: Sun, 04 Dec 2005 20:22:25 -0800
You should also investigate whether you will need a cathodic protection system. We were involved in a number of homes which were founded over salt ponds and eventually had serious problems. The Manhattan Beach pier was an example of severe corrosion and electrolyses problems in the 1980's. Wiss, Janney provided a very good report on the problems and solutions to that structure.
Neil Moore, SE, SECB
neil moore and associates
structural distress investigations
At 06:07 PM 12/2/2005, Raymond Shreenan wrote:
Sika has numerous products for concrete repairs that include rusted re-bar problems. They certify contractors for proper use of their products and they are well known internationally for their research and development of repair products and their use.
Ray Shreenan SE
----- Original Message -----
- From: Javier Encinas
- To: seaint(--nospam--at)seaint.org
- Sent: Friday, December 02, 2005 12:56 PM
- Subject: Corrosion in reinforcing steel in slabs
- Does anybody have a good reference (books, articles, catalogs, web sites, etc.) regarding some methods to repair elevated slabs whose rebars are severely corroded? Is there any commercial product or technique to restore the structural capacity of the slab, other than demolishing and re-building? Thanks in advance.
- Javier Encinas, MSCE, PE
- SPECTRA Engineering, PSC
- Prev by Subject: Re: Corrosion in reinforcing steel in slabs
- Next by Subject: RE: Corrosion in reinforcing steel in slabs
- Previous by thread: Re: Corrosion in reinforcing steel in slabs
- Next by thread: RE: Corrosion in reinforcing steel in slabs