Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Staad Report

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Santhosh,

Have you repeatedly used the Load list and Print Support Reactions
command in the conventional STAAD editor and printed it out?  Did it
work this way?

If you send me your STAAD file I'll take a look at it.

Regards,



John T. Whitty, P.E.
Sr. Project Manager
ITAC Engineers and Constructors



-----Original Message-----
From: Santhosh Kumar Yedidi [mailto:sant527(--nospam--at)gmail.com] 
Sent: Friday, January 06, 2006 1:04 AM
To: seaint(--nospam--at)seaint.org
Subject: Staad Report

I need an help on putting reaction envelop in report of staad for
different sets of load cases separately.

I will explain in more detail.

There are 200 load cases: loadcase 101 to 300
After running the analysis in staad: I have selected load cases 101 to
200 and then I enter report page where i have selected in output -
reaction envelope and I have saved this using load/save option. as
LC_101_200

Again in the staad I have selcted loadcases 201 to 300 and then I
enter report page where i have selected in output - reaction envelope
and I have saved this using load/save option.as LC_201_300

But when I view the report after exporting it it doesnot show both the
sets. It only shows the recent set.

I think staad persons can understand this.

santhosh

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********