Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Local Axes-Risa 3D

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Have you downloaded the updates from www.risatech.com?

Gary Grinstead
www.structuralstuff.com


Quoting Joseph  Grill <jrgrill(--nospam--at)cableone.net>:

> Charlie,
> I'll try the beam test tomorrow.  I'd do it tonight, but I left that damned
> dongle at the office.
> But, thanks for the info.
> Joe
>   ----- Original Message ----- 
>   From: CanitzCF(--nospam--at)aol.com 
>   To: seaint(--nospam--at)seaint.org 
>   Sent: Tuesday, January 10, 2006 6:47 PM
>   Subject: Re: Local Axes-Risa 3D
> 
> 
>   Just happen to be using RISA 3D. Used the same process as suggested by Gary
> except I used Members instead of Plates. The local axes appeared. Perhaps
> reinstall the program and see if that works?
> 
>   Charlie Canitz
>   Annapolis, MD




----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********