Need a book? Engineering books recommendations...
RE: The Most Ridiculous Item of the Day (with apologies to Bill O'Reilly)[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: <seaint(--nospam--at)seaint.org>
- Subject: RE: The Most Ridiculous Item of the Day (with apologies to Bill O'Reilly)
- From: "Rich Lewis" <seaint03(--nospam--at)lewisengineering.com>
- Date: Wed, 11 Jan 2006 10:43:40 -0600
I don’t know the specifics of your design loads, but can you justify an unreinforced section based on uncracked section properties. Then does the steel essentially become shrinkage steel?
From: Bill Allen
Now I know I have finally made it to the
Big Time ™. I have recently been retained to design a light standard
foundation. The light standard is 5” square and 25 feet tall with a light
fixture at the top. The footing projects 2’-6” above grade and is
2’-0” in diameter. The installation is in
The “project” was plan checked by an outside consultant who shall remain unnamed. The plan checker is an SE and his number is only about 400 higher than mine. At a passing rate of 100/year, that means he probably passed in 1987-1988 or so. So, it’s not like he’s a neophyte.
I’ve got a plan check list consisting of six items, four of which are structural.
I’ll limit my post to The Ridiculous
Item of the Day. Since the top of the footing projects 2’-6” above
grade, he is requesting that the footing be designed as a concrete column with
a minimum reinforcing of 1%. He is citing CBC section 1910.16.8.6 but I believe
he really means 19.10.1 since the footing is not a composite section. For a
2’-6” diameter section, this means I need to provide (don’t
Now, I can find a few references to reinforce (sorry for the pun) my argument that this section is not a column (Pu<0.10f’cAg, d/L>3, tension controlled section, etc.), but I seem to recall a section of the code where it was very clear that, if Pu<0.10f’cAg, then the section can be considered a beam and not a column. Unfortunately, I can no longer find that specific section in the code.
Is this still applicable? Am I dreaming that there is an exception in the code?
T. William (Bill) Allen, S.E.
Consulting Structural Engineers
- Prev by Subject: RE: The Most Ridiculous Item of the Day (with apologies to Bill O'Reilly)
- Next by Subject: Re: The Most Ridiculous Item of the Day (with apologies to Bill O'Reilly)
- Previous by thread: The Most Ridiculous Item of the Day (with apologies to Bill O'Reilly)
- Next by thread: Re: The Most Ridiculous Item of the Day (with apologies to Bill O'Reilly)