Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Lag Bolts into Narrow Face of a Stud

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Tarek - that's the detail to use...you beat me to it!  :)
One thing to add though...I would use wood screws instead of nails from the
clip into the ledger to avoid the possibility of suction pullout.

~~ Eli ~~

-----Original Message-----
From: Tarek Mokhtar [mailto:tarooky(--nospam--at)earthlink.net] 
Sent: Tuesday, February 28, 2006 2:13 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: Lag Bolts into Narrow Face of a Stud

Gerard,

How about an A35 from stud to back of ledger, and if ledger is deep enough,
may
be two A35's staggered
my $.02

Tarek Mokhtar, SE
Laguna Beach

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********