Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Lag Bolts into Narrow Face of a Stud

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Thanks, the footnotes say 100% values can be increase to 1.33, so yep, 5
would work.

Thanks to all, I think I've got it all worked out now!

-gm

-----Original Message-----
From: Suresh Acharya [mailto:SAcharya(--nospam--at)ci.alameda.ca.us]
Sent: Tuesday, February 28, 2006 5:18 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: Lag Bolts into Narrow Face of a Stud

If you are using CD=1.25, with 260# per SDS screws, you only need 5
screws. This seems to a neat solution.
Further, since you have 1.75" side member instead of 1.5", you should
be on conservative side.

Suresh Acharya, S.E.




>>> gmadden(--nospam--at)maddengine.com 2/28/2006 5:08 PM >>>
1450 #
 
-----Original Message-----
From: Eli Grassley [mailto:elig(--nospam--at)psm-engineers.com]
Sent: Tuesday, February 28, 2006 5:05 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: Lag Bolts into Narrow Face of a Stud
 
Or a custom fabricated heavy gauge bent plate with a few thru bolts.
If
your loads are really *that* big that a few A35's won't work, then I
would definitely not be screwing around with trying to get a lag bolt
into the side of a 2x stud.
 
~~ Eli ~~
 
-----Original Message-----
From: BPCE(--nospam--at)aol.com [mailto:BPCE(--nospam--at)aol.com]
Sent: Tuesday, February 28, 2006 4:57 PM
To: seaint(--nospam--at)seaint.org
Subject: Re: Lag Bolts into Narrow Face of a Stud
 
In a message dated 2/28/06 3:34:14 PM Pacific Standard Time,
gmadden(--nospam--at)maddengine.com writes:
Two problems for my condition, the load requires me to use 4 A35, they
would need to be offset from each side to avoid nails coming from each
side, making the ledger very deep. The other problem is nails heads
from
the A35 sticking out of the ledger (i.e. 3" long nail, with 1.25 of
nail
sticking out of the 1.75" thick ledger)... then you would need to use
screws, not high values with only 1.75" of penetration... don't wanna
use a thicker ledger either.
 
 
How about using HGA10 instead of A35
 
Kulwant

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********