Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: 3X Plates and Washers on Intermediate Anchors

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Another analogy that helps visualize the shrinkage:  When you install a ring gear on a flywheel, you heat it up to expand it, slip it onto the flywheel, and when it cools, it shrinks in place and clamps the flywheel.

 


From: Rhkratzse(--nospam--at)aol.com [mailto:Rhkratzse(--nospam--at)aol.com]
Sent: Thursday, March 02, 2006 10:46 AM
To: gmadden(--nospam--at)maddengine.com; seaint(--nospam--at)seaint.org
Subject: Re: 3X Plates and Washers on Intermediate Anchors

 

Wouldn't the holes *shrink* if the entire piece of wood shrank (shrunk?) as it dried?
Ralph

In a message dated 3/2/06 9:26:18 AM, gmadden(--nospam--at)maddengine.com writes:


with shrinkage, the holes size will increase over time

The information contained in the e-Mail, including any accompanying documents or attachments, is from Moffatt & Nichol and is intended only for the use of the individual or entity named above, and is privileged and confidential. If you are not the intended recipient, be aware that any disclosure, dissemination, distribution, copying or use of the contents of this message is strictly prohibited. If you received this message in error, please notify us.