Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: 3X Plates and Washers on Intermediate Anchors

[Subject Prev][Subject Next][Thread Prev][Thread Next]
The holes got bigger or the spindles got smaller?

-----Original Message-----
From: Haan, Scott M POA [mailto:Scott.M.Haan(--nospam--at)poa02.usace.army.mil]
Sent: Thursday, March 02, 2006 12:44 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: 3X Plates and Washers on Intermediate Anchors

I have a rocking chair that was brought up the Al-Can highway.  It was
wetter
there and the spindles were tight.  It is drier here - the holes got
bigger
and the spindles are falling out of the holes.

-----Original Message-----
From: Chuck Ritter [mailto:riter(--nospam--at)jar.com]
Sent: Thursday, March 02, 2006 10:40 AM
To: 'seaint(--nospam--at)seaint.org'
Subject: RE: 3X Plates and Washers on Intermediate Anchors

Windsor chairmakers use dry spindles and green seats so that as the
chair
reaches equilibrium the seat will grab the spindles. Besides being
elegant in
design, Windsor style chairs are among the most durable made. Maybe a
hole
boundary wants to shrink away from the original profile, but overall, it
is
governed by bulk shrinkage. Also, given that wood pretty much doesn't
shrink
axially, the hole profile will ovalize, not shrink uniformly.

Chuck Ritter
JAR Associates, Inc
401-294-4589
401-294-3826 fax


-----Original Message-----
From:	Gerard Madden, SE [SMTP:gmadden(--nospam--at)maddengine.com]
Sent:	Thursday, March 02, 2006 2:05 PM
To:	seaint(--nospam--at)seaint.org
Subject:	RE: 3X Plates and Washers on Intermediate Anchors

My first instinct was to think that the free edges of the wood move
toward
the fibers behind it, the wood contracts when the water escapes making
the
hole larger because those extreme fibers around the edge of the hole are
moving back to where there is more wood. I guess what your saying is
that the
edges of the sill are shrinking at a greater rate than the hole, that
the
overall shrinkage of the sill is such that it surpasses the shrinkage of
the
hole fibers making the end result a smaller/tighter hole diameter.

Sound right?

-gm

-----Original Message-----
From: Garner, Robert [mailto:rgarner(--nospam--at)moffattnichol.com]
Sent: Thursday, March 02, 2006 10:51 AM
To: seaint(--nospam--at)seaint.org; gmadden(--nospam--at)maddengine.com
Subject: RE: 3X Plates and Washers on Intermediate Anchors

Another analogy that helps visualize the shrinkage:  When you install a
ring
gear on a flywheel, you heat it up to expand it, slip it onto the
flywheel,
and when it cools, it shrinks in place and clamps the flywheel.

  _____

From: Rhkratzse(--nospam--at)aol.com [mailto:Rhkratzse(--nospam--at)aol.com]
Sent: Thursday, March 02, 2006 10:46 AM
To: gmadden(--nospam--at)maddengine.com; seaint(--nospam--at)seaint.org
Subject: Re: 3X Plates and Washers on Intermediate Anchors

Wouldn't the holes *shrink* if the entire piece of wood shrank (shrunk?)
as
it dried?
Ralph

In a message dated 3/2/06 9:26:18 AM, gmadden(--nospam--at)maddengine.com writes:


with shrinkage, the holes size will increase over time The information
contained in the e-Mail, including any accompanying documents or
attachments,
is from Moffatt & Nichol and is intended only for the use of the
individual
or entity named above, and is privileged and confidential. If you are
not the
intended recipient, be aware that any disclosure, dissemination,
distribution, copying or use of the contents of this message is strictly
prohibited. If you received this message in error, please notify us.

 << File: ATT00045.html >>



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********

The information contained in the e-Mail, including any accompanying documents or attachments, is from Moffatt & Nichol and is intended only for the use of the individual or entity named above, and is privileged and confidential.  If you are not the intended recipient, be aware that any disclosure, dissemination, distribution, copying or use of the contents of this message is strictly prohibited.  If you received this message in error, please notify us.

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********