Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: 3X Plates and Washers on Intermediate Anchors

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Joe –

 

If you are suggesting that the plate washers and/or the 3x sill plates are a result of such a practice, then you are saying (the way I’m reading your remark) is that it is O.K. to slot cut the sill plate and over drill the holes for the anchors IF one uses plate washers and/or 3x sill plates. Wouldn’t it be better to prohibit slot cuts and over-drilling instead?

 

Regarding the longitudinal splitting, what do you think caused that?

 

T. William (Bill) Allen, S.E.

ALLEN DESIGNS

Consulting Structural Engineers
 
V (949) 248-8588 F(949) 209-2509

-----Original Message-----
From:
Jnapd(--nospam--at)aol.com [mailto:Jnapd(--nospam--at)aol.com]
Sent: Thursday, March 02, 2006 10:39 AM
To:
seaint(--nospam--at)seaint.org
Subject: Re: 3X Plates and Washers on Intermediate Anchors

 

Bill:

You have probably see several of the Orange and LA County housing tracts that were done piece mill by the framing contractors.  Remember how they use to and sometimes slot cut the sill plates because it was faster to erect...time is money one house a day...

That; along with laborers that were told not to or were to lazy to change drill bits as they were drilling away on wood members.  Holes around sill plates were usually 3/4 -1" while using 1/2" anchor bolts.  This was confirmed after Northridge during site visits by several people..............so new City of LA interim memo.....now code.

 

Also at several apartment projects I and others investigated in the San Fernando Valley found sill plates split lengthwise along the AB line.

 

Joe Venuti
Johnson & Nielsen Associates
Palm Springs, CA