Need a book? Engineering books recommendations...
Re: Pergola Lateral Support[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: Peder(--nospam--at)jgpierson.com, seaint(--nospam--at)seaint.org
- Subject: Re: Pergola Lateral Support
- From: Rhkratzse(--nospam--at)aol.com
- Date: Tue, 28 Mar 2006 19:43:10 EST
That's an interesting concept that I've considered using in the past. I assume you would calculate the required embedded length of the steel post (pipe?) based on perpendicular to grain bearing. How would you handle any concern about splitting of the column?
Ralph Hueston Kratz, S.E.
Richmond CA USA
In a message dated 3/28/06 4:37:14 PM, Peder(--nospam--at)jgpierson.com writes:
I have a project that I've been scratching my head on and would like some suggestions. I have an existing pergola structure in the garden area of a local hospital that needs to be rebuilt. This thing has 12" diameter carved wood columns that are 7 ft long and sit on concrete piers/footings. The 4 columns were tied together (doweled) at the top with 6x12 sawn beams with 3x6 purlins over that (no exposed hangers). I think the base was set on nails cast into the concrete. All the wood has decorative cuts, etc. The thing was taken down over a year ago due to decay and they now want to put it back with all new wood and concrete except they want to reuse the 12" diameter wood posts. This thing is 18 ft x 10 ft in plan and in a rhombus shape. The concrete piers are 42" above grade where the wood posts will sit and span 7 ft up to the beams. The new beams will be 5 1/8" x 12" pressure treated glu-lam beams (about 11 ft above grade).
The question is lateral support? It never really had any and they really want it to look the same as before. Currently no diaphragm and no fixed columns. I'm thinking of requiring them to drill out the columns for steel posts that get cast into the new concrete. Anybody else have lateral support ideas for an open pergola. They don't want knee braces. Seismic controls over wind using a limited wind exposure and I see this thing weighing only about 1500 pounds total.
- Prev by Subject: RE: Pergola Lateral Support
- Next by Subject: Permanent metal forms for concrete
- Previous by thread: RE: Pergola Lateral Support
- Next by thread: shear values using staples and nails