Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Lag screws in Microlam and Paralam

[Subject Prev][Subject Next][Thread Prev][Thread Next]
National Design Specification with specific gravity for the microlam or parallam material you are using.  The SG information can be found in the ICC reports at:
www.iccsafe.org and lick on ES Reports along with their limits on spacing of fasteners.  
 
Bill Cain, S.E.
Berkeley CA
 
 
-----Original Message-----
From: jascopac <jascopac(--nospam--at)pacbell.net>
To: Seaint@Seaint. Org <seaint(--nospam--at)seaint.org>
Sent: Tue, 30 May 2006 10:55:07 -0700
Subject: Lag screws in Microlam and Paralam

Where can I find values for the capacity of lag screws in Microlam and
Paralam products?
The project is in California.

God bless all of the service men and women who gave their lives for our
country!


James A. Sadler, SE
Jasco Pacific, Inc.
550-D Industrial Way
Fallbrook, CA 92028
1-760-723-8135
1-760-723-8136 Fax
jascopac(--nospam--at)pacbell.net



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********