Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: HSS column splice

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Joe –

 

I’ve specified things like this (on minor structures), but only with sections that have 3/16” thick walls. I think you might have trouble with 1/4” thick walls.

 

T. William (Bill) Allen, S.E.

ALLEN DESIGNS

Consulting Structural Engineers
 
V (949) 248-8588 F(949) 209-2509

-----Original Message-----
From: Joe Grill [mailto:jgrill(--nospam--at)swiaz.com]
Sent: Wednesday, June 07, 2006 3:06 PM
To: 'seaint'
Subject: HSS column splice

 

I'm doing a column splice detail.  I'm told that lengths over 20' in a 5x5 tube steel aren't available around here.  The splice will be just above a floor diaphragm, and I will be able to block the column into the floor framing pretty well.  I’m considering using a sleeve from a section of HSS that is larger than the column section.

 

Anyway, will an HSS 5x5 fit inside an HSS 5.5x5.5x1/4 sleeve?  Has anybody else out there done this?

Joe

 

 

Joseph R. Grill, P.E. (Structural)

Shephard - Wesnitzer, Inc.

Civil Engineering and Surveying