Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Beam sleeve

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Thank you for those references but am unable to locate them anywhere. Any suggestions?
Walter DeVore

Himat Solanki wrote:
Please see PCA Research Bulletin # RD005.01D,1970 and apaper byK.T.BUrton, ACI Journal Oct. 1965, pp.1327-1344 or PCA Bulletin D95. These two publication may clerify your concern
Himat Solanki

cavitywall(--nospam--at) 07/13/06 4:01 PM >>>
If a beam, for example 7.5" wide needs to have 2.5" diameter sleeves 
cast within the middle third, top to bottom,  is the entire "b" width 
value decreased by that 2.5" for inertia and moment capacity 
calculations? Does the spacing of the sleeves come into play, for 
example on 6" centers versus 12" centers. Thanks so much for any insight.


******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * * * Questions to seaint-ad(--nospam--at) Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: ******* ****** ****** ****** ******* ****** ****** ********