Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: 3x4 Shear Wall Studs

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Your epiphany on this subject will be unhappy news for the millions of  2x4 shearwall (in & out of, the labs) :o)
Why do you ask the question? Are you trying to build something goofy?  As you know, all the code shearwall values are emprical.
Chuck Utzman, PE

Dave Gaines wrote:
For plywood shear walls the plywood needs to be nailed a minimum of 3/8 inch from the edge.  So does the stud.  There should be a 1/8 inch space between panel edges for expansion with moisture.  You can not get this edge distance and spacing with a 1 1/2", 2x stud.  For proper edge distance and adequate nailing for a plywood shear wall you need to use a minimum of 3x4 studs at the panel edges.  The table calls for nominal 2x studs.  For higher shear loads you need 3x4 studs, per the shear wall nailing table.
Dave Gaines
----- Original Message -----
Sent: Tuesday, July 25, 2006 1:36 PM
Subject: Wood Shear Wall Studs < 2x4

Anyone aware of information regarding shear wall construction with studs less than 2x4?


Barry H. Welliver