Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Metal Deck

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I'm not usually one for semantics, but you may want to amend that. The section modulus will be identical for a section symmetrical about the y axis when rotated 180 degrees about the x axis. The compression and tension fiber will be flipped, however this is a steel fabrication and the properties are (nominally) non-isotropic. There may be stability issues, including buckling/crippling, which may vary with orientation but the minimum section modulus (S) will remain the same numerical value, as both the moment of inertia and the outer fiber distance are constants.

Sorry to be pedantic this Monday morning, but the whole concept of "bending" stress has rubbed me the wrong way since entering the building industry. It is a useful concept and makes for computational efficiency but it is an artifact of dealing with materials which are not isotropic-homogeneous and wanting to treat them without computational gymnastics.

Most of us knew exactly what you meant, but there may be some on this list who would take your parenthetical to equate bending strength with section modulus in all cases.
Jordan
PS - Feel free to call me out on my next slip...it's just a matter time ;-)


Garner, Robert wrote:

Before you reverse the profile, please consider that the bending strength (section modulus) of the deck will be different depending on which side of the deck is up.

 

Bob Garner, S.E.

 


From: Gary Loomis [mailto:gloomis(--nospam--at)MasterEngineersinc.com]
Sent: Monday, August 28, 2006 6:33 AM
To: seaint(--nospam--at)seaint.org
Subject: RE: Metal Deck

 

Please provide additional information.  Is this a roof deck, composite metal, or form deck?  What is the depth of the deck?  What are the section properties required?  We typically specify minimum section properties and steel strength requirements.  Is the deck galvanized or painted?

 

-----Original Message-----
From: Ravinath M. [mailto:ravinath27(--nospam--at)gmail.com]
Sent: Monday, August 28, 2006 3:31 AM
To: seaint(--nospam--at)seaint.org
Subject: Metal Deck

 

Hi All,

            Can anybody give me the requirements of metal deck profile.

I am currently checking the design submitted by a contractor for an office floor. They proposed a metal deck of 0.64 mm thickness, ribs with the following dimensions.

10mm at bottom, 40 mm at top at 165 mm c/c spacings.

Is there any criteria for selection of profile dimensions?

According to the dimension of the profile proposed bearing width on support will be just 10mm. I suggested to reverse the profile to have more bearing on the support.

Kindly give me your opinion on this.

 

Regards


M.Ravinath
Kuwait

The information contained in the e-Mail, including any accompanying documents or attachments, is from Moffatt & Nichol and is intended only for the use of the individual or entity named above, and is privileged and confidential. If you are not the intended recipient, be aware that any disclosure, dissemination, distribution, copying or use of the contents of this message is strictly prohibited. If you received this message in error, please notify us.
******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********