Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Hollow CMU anchors

[Subject Prev][Subject Next][Thread Prev][Thread Next]
That would probably entail grouting the full height of the wall since there
appear to be no bond beam courses except above openings. I think I have
settled on through bolting with plate washers.

Mark E. Deardorff, Structural Engineer
Burkett & Wong
San Diego, CA 

 

> -----Original Message-----
> From: David Merrick [mailto:MRKGP(--nospam--at)winfirst.com] 
> Sent: Tuesday, October 03, 2006 9:23 AM
> To: SEAINT
> Subject: Hollow CMU anchors
> 
> Knock out holes, Grout the cell, and observe.
> 
> David Merrick, SE
> Sacramento, CA
> 
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> * 
> *   This email was sent to you via Structural Engineers 
> *   Association of Southern California (SEAOSC) server. To 
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
> *   send to the list is public domain and may be re-posted 
> *   without your permission. Make sure you visit our web 
> *   site at: http://www.seaint.org 
> ******* ****** ****** ****** ******* ****** ****** ******** 
> 
> 



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********