Need a book? Engineering books recommendations...
Re: Caisson cold joint[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: seaint(--nospam--at)seaint.org
- Subject: Re: Caisson cold joint
- From: Roger Davis <sds_rdavis(--nospam--at)yahoo.com>
- Date: Fri, 8 Dec 2006 05:51:10 -0800 (PST)
Jim Wilson <wilsonengineers(--nospam--at)yahoo.com> wrote:
100ft tall light poles are being erected on 4ft diameter caisson's at a local university. The contractor has asked if he can place a cold joint down about 4ft below the top of the caisson. This will facilitate installation of the anchor bolts and templates as well as electrical conduits.Is this generally acceptable and is it common? The Engineer for the pole manufacturer designed the foundation, but they have not been asked about the cold joint. Maybe that answer needs to come from the owner's engineer, but they are electical and not qualified to answer the question. So they in turn asked me but I know very little about caissons and told them I would at least ask the appropriate people.Thanks in advance for any advice on this.Jim Wilson, PEStroudsburg, PA
Access over 1 million songs - Yahoo! Music Unlimited.Roger DavisArchitectSDS Architects, Inc.
Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and get things done faster.
- Caisson cold joint
- From: Jim Wilson
- Prev by Subject: Re: Caisson cold joint
- Next by Subject: RE: Caisson cold joint
- Previous by thread: RE: Caisson cold joint
- Next by thread: Re: Caisson cold joint