Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: wet signature in CALIF

[Subject Prev][Subject Next][Thread Prev][Thread Next]

6735. Preparation, signing, and sealing of civil engineering documents

(a) All civil (including structural and geotechnical) engineering plans, calculations, specifications, and reports (hereinafter referred to as "documents") shall be prepared by, or under the responsible charge of, a registered civil engineer and shall include his or her name and license number. Interim documents shall include a notation as to the intended purpose of the document, such as "preliminary," "not for construction," "for plan check only," or "for review only." All civil engineering plans and specifications that are permitted or that are to be released for construction shall bear the signature and seal or stamp of the registrant, the date of signing and sealing or stamping, and the expiration date of the certificate or authority. All final civil engineering calculations and reports shall bear the signature and seal or stamp of the registrant, the date of signing and sealing or stamping, and the expiration date of the certificate or authority. If civil engineering plans are required to be signed and sealed or stamped and have multiple sheets, the signature, seal or stamp, date of signing and sealing or stamping, and expiration date of the certificate or authority shall appear on each sheet of the plans. If civil engineering specifications, calculations, and reports are required to be signed and sealed or stamped and have multiple pages, the signature, seal or stamp, date of signing and sealing or stamping, and expiration date of the certificate or authority shall appear at a minimum on the title sheet, cover sheet, or signature sheet.

 

T. William (Bill) Allen, S.E.

ALLEN DESIGNS

Consulting Structural Engineers
 
V (949) 248-8588 F(949) 209-2509

-----Original Message-----
From: David Topete [mailto:dtopete(--nospam--at)gfdseng.com]
Sent:
Wednesday, March 21, 2007 9:21 AM
To:
seaint(--nospam--at)seaint.org
Subject: wet signature in
CALIF

 

Does anyone have the B & P code reference that says each sheet of a submittal must be “wet signed”?  I’ll search in the mean time, but any info is much appreciated.  TIA.

 

David A. Topete, SE