Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: "Certifying" Lifting Plates

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Tom,

Thanks much!  It was VERY helpful.  I still have some questions after
reading that intreptation and some other information linked to that page,
but I now have a "lead" to pursue thanks to you.

Thanks again,

Scott
Adrian, MI


On Tue, 1 May 2007 Tom.Hunt(--nospam--at)fluor.com wrote:

> Scott,
>
> Here is an interesting OSHA link that may provide some guidance:
>
> http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=25192
>
> Thomas Hunt, S.E.
> Fluor
>
>
>
>
>
> Scott Maxwell <smaxwell(--nospam--at)engin.umich.edu>
> 05/01/2007 04:42 PM
> Please respond to seaint
>
> To
> seaint(--nospam--at)seaint.org
> cc
>
> Subject
> "Certifying" Lifting Plates
>
>
>
>
>
>
>
> We have lifting plates that we use for lifting our SIP panels into place.
> They are bascially steel plates that are screwed to the SIP panels that
> can then allow the attachment of the lifting straps.  We would like to put
> a load rating on those lifiting plates.  I can obviously come up with a
> reasonable load limit for the plates, but we are wondering if there is any
> required "official" process that one must undertake.  For example
> something that would be similar to an ICC-ES evaluation, but by maybe OSHA
> or someone else.  Is anyone aware of anything like that?  Any requirements
> that anyone might be aware of?
>
> Thanks,
>
> Scott
> Adrian, MI
>
>
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> *   This email was sent to you via Structural Engineers
> *   Association of Southern California (SEAOSC) server. To
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> *   send to the list is public domain and may be re-posted
> *   without your permission. Make sure you visit our web
> *   site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>
>
>
> -----------------------------------------------------------------------------------------------------
> The information transmitted is intended only for the person
> or entity to which it is addressed and may contain proprietary,
> business-confidential and/or privileged material.
> If you are not the intended recipient of this message you
> are hereby notified that any use, review, retransmission,
> dissemination, distribution, reproduction or any action taken
> in reliance upon this message is prohibited. If you received
> this in error, please contact the sender and delete the
> material from any computer.  Any views expressed in this message
> are those of the individual sender and may not necessarily reflect
> the views of the company.
> -------------------------------------------------------------------------------------------------------
>
>

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********