Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: "Certifying" Lifting Plates

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Title: "Certifying" Lifting Plates
Search AISC for Dave Ricker's article on lifting beam design.


From: Gary Loomis [mailto:gloomis(--nospam--at)MasterEngineersinc.com]
Sent: Tuesday, May 01, 2007 6:33 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: "Certifying" Lifting Plates

There is an ASME standard B30.20, Below the Hook, that we use for load rating.  There is also an AISC paper that was written for designing lifting devices.  I am at home and do not remember the exact title or date.
 
Gary Loomis, PE
Master Engineers and Designers, Inc.


From: Scott Maxwell [mailto:smaxwell(--nospam--at)engin.umich.edu]
Sent: Tue 5/1/2007 7:45 PM
To: seaint(--nospam--at)seaint.org
Subject: "Certifying" Lifting Plates

We have lifting plates that we use for lifting our SIP panels into place.
They are bascially steel plates that are screwed to the SIP panels that
can then allow the attachment of the lifting straps.  We would like to put
a load rating on those lifiting plates.  I can obviously come up with a
reasonable load limit for the plates, but we are wondering if there is any
required "official" process that one must undertake.  For example
something that would be similar to an ICC-ES evaluation, but by maybe OSHA
or someone else.  Is anyone aware of anything like that?  Any requirements
that anyone might be aware of?

Thanks,

Scott
Adrian, MI


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********