Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Steel Member Check for Seismic Loading

[Subject Prev][Subject Next][Thread Prev][Thread Next]
It looks like the engineer was evaluating the loads at a 45 degree angle and did SRSS (square root of the sum of the squares) to sum the forces and stresses.  This seems like a reasonable approach when both orthogonal forces don't occur at the same time.
 
Paul.

 
On 5/3/07, 남윤호 <yhnam(--nospam--at)kopec.co.kr> wrote:

Dear All,

 

I have the old calculation(1984 made) of steel code check for seismic excitation loading.

 

In generally steel check for combined bending and axial stress interaction is as follows:

  fa/Fa + fbx/Fbx + fby/Fby < 1.0            -----------(1)

However, the old calculation used the steel check formula under 2 directions horizontal seismic loading(1g each) as follows:

  fa/Fa + root(fbx^2+fby^2)/Fbx < 1.0     -----------(2)

 

Is it reasonable using equation (2) that steel code checked under 2 directions horizontal seismic loading? If it is reasonable, why do you think using Eq. (2)?


 

Yoonho Nam, PE

Shaw Stone & Webster Nuclear