Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Dumb Question

[Subject Prev][Subject Next][Thread Prev][Thread Next]
No. That is 90# per 100 sq ft. So 0.9 psf.

Mark E. Deardorff, S.E.
Structural Engineer
Burkett & Wong Engineers
3434 4th Ave
San Diego, CA 92103
P 619.299.5550
F 619.299.9934
mdeardorff(--nospam--at)burkett-wong.com
 

> -----Original Message-----
> From: Thor Tandy [mailto:vicpeng(--nospam--at)telus.net] 
> Sent: Friday, June 15, 2007 9:28 AM
> To: SEAINT
> Subject: Dumb Question
> 
> 90lb roof felt!  Am I right in taking the material weight to 
> be 90lb/ft^2?
> 
> Thanks
> 
> Thor T
> 
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> * 
> *   This email was sent to you via Structural Engineers 
> *   Association of Southern California (SEAOSC) server. To 
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
> *   send to the list is public domain and may be re-posted 
> *   without your permission. Make sure you visit our web 
> *   site at: http://www.seaint.org 
> ******* ****** ****** ****** ******* ****** ****** ******** 
> 
> 



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********