Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Maximum Moments in Beams

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Mauricio,

 

I suggest you get a copy of AISC Design Guide 15 - Rehabilitation and Retrofit Guide.  It has good information on older beams.  Your beam is a 12B16.5.  It is not a W12x16.  You can not directly use the tables from AISC 13th edition.  It is based on ASTM A992 steel.  Your beam is probably ASTM A7 or A36.  This will change the allowable shear and bending stresses.

 

HTH

 

Rich

 

 


From: Mauricio Castro [mailto:rico355(--nospam--at)hotmail.com]
Sent: Tuesday, July 17, 2007 9:27 AM
To: seaint(--nospam--at)seaint.org
Subject: Maximum Moments in Beams

 

I am currently revising the structure of the floor of a building to make sure that the old beams will manage to carry an increase in dead load of about 7/5 of the current load. I calculated the new maximum moments and compared them to the maximum moments allowed by the beam (Using my 13th edition AISC steel construction manual).

I am getting maximum moments of about 8 kip-ft and according to the manual these beams (12 B 16.5 which are supposed to be W12x16) should resist moments up to 75.4 kip-ft. This is a noticeable difference which makes me thing that either the beam highly safe or the calculations wrong. I haven't considered safety factors yet, but even then, the safety factor would be too high. The floor is the top floor and practically only carries the weight of a reactor (around 13kips) and unfortunately the only plans are the layouts of the beams.

 

Does this difference in maximum moments sound right?

 

Mauricio Castro

Civil Engineering Student

LSU



Missed the show?  Watch videos of the Live Earth Concert on MSN.

******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********